Esoofali Esmailji Karachiwala & Co

6x19 construction wire rope is available with either FC (fibre core) or WSC (wire strand core). When supplied with a wsc the rope is more commonly referred to as 7x19. The rope is very popular in diameters from 3mm to 16mm and is used on a variety of applications. 6x19 FC and 6x19 WSC (7x19) is very flexible in diameters 3mm to 6mm and is used for many requirements where wire ropes are running over pulleys.

• Industrial door cables
• Garage door cables
• Where cables are required to run over pulleys
• Control cables
• General engineering applications

• Gym equipment cables
• Wind turbine
• Wire rope slings
• Whip checks
• Winch ropes

6x36 is a flexible general engineering wire rope readily available in galvanised and ungalvanised coatings. The wire rope has an equal lay construction (warrington seale) and achieves a superior breaking load to the 6x19 construction range. The construction has been designed to give a flexible rope with a good fatigue life. A 6x36 wire rope is available with either FC (fibre core) or IWRC (independent wire rope core) and is used for a wide range of applications, examples of which are shown below:

• Wire rope slings
• General engineering applications
• Crane ropes
• Hoist rope
• Winch ropes
• Holding and closing ropes for grab cranes

• Tow ropes
• Luffing ropes
• Pursing wires
• Mooring ropes
• Lifeboat falls
• Wire rope rigging applications

Superior Elevator & Lift Application Wire Ropes, with multiple Tensile designations & Core types. Used by OEM's and by Maintenance and Repair customers.

19X7 is available in both galvanised and ungalvanised finish. The construction family includes 18X7 and 19X7. For further flexibility and other performance characteristics we also supply 32X7, 34X7, 35X7 and 37X7. 
Example of applications for non-rotating wire ropes include the following

• Crane rope

• Main hoist rope

• Whip hoist rope

• Pillar crane rope

• Deck crane rope

• Offshore crane rope

35X7 is available in both galvanised and ungalvanised finish with either ordinary or langs lay. The construction family includes 34X7 and 37X7. 
Depending upon your requirement for higher breaking load or better wear characteristics, these wire ropes are available in different finishes and lubrications as well as being available with plastic impregnated or in compacted constructions. 
Example of applications for non-rotating wire ropes include the following

• Crane rope

• Main hoist rope

• Whip hoist rope

• Pillar crane rope

• Deck crane rope

• Offshore crane rope

​Applications:

• Wire rope slings

• General engineering applications

• Crane ropes

• Hoist rope

• Winch ropes

• Holding and closing ropes for grab cranes

• Tow ropes

• Luffing ropes

• Pursing wires

• Mooring ropes

• Lifeboat falls

• Wire rope rigging applications

Applications:

• Crane rope

• Main hoist rope

• Whip hoist rope

• Pillar crane rope

• Deck crane rope

• Offshore crane rope

Applications:

• Crane rope

• Main hoist rope

• Whip hoist rope

• Pillar crane rope

• Deck crane rope

• Offshore crane rope