WIRE ROPE ACCESSORIES
Please click on each item for catalogs
_edited.jpg)
Meets the requirements IS 2485
Zinc (spelter) sockets are efficient and permanent terminal attachments for wire rope. They are the most reliable of all terminal fittings . and when correctly attached, these standard drop-forged sockets are 100% efficient. They are recommended for all standing ropes and whenever service conditions are severe. Only trained and fully qualified personnel should be permitted to make these connections since it is a skill that- requires good facilities and a thorough understanding of the manufacturer's instructions.
Meets the requirements IS 2361
Wire Rope Clamps (bulldog Grips) are heavy-duty wire rope clips designed as per Indian Standard 2361 specifications. Made from forged steel with a galvanized finish, they ensure secure rope terminations and reliable performance in lifting, rigging, and general-purpose applications. Ideal for 6x19 or 6x37 IWRC ropes, these grips offer easy installation and strong clamping strength.
Meets the requirements of US Federal Specification
Wire Rope Clamps (bulldog Grips), conforming to U.S. Federal Specification FF-C-450 Type I Class 1, are forged wire rope clips designed for forming eye terminations and wire rope loop connections. Manufactured from forged steel and hot-dip galvanized for corrosion resistance, these grips consist of a U-bolt, forged saddle, and two hex nuts, ensuring strong and secure clamping of the rope
Wedge sockets are among the simplest devices for anchoring a wire rope for any purpose. Thy are intended for on-the-job attachment and for quick rope replacement. Principal advantages are simplicity, ease and speed of applying and detaching. They are also used where conditions are such that spliced eyes could not be reeved and would have to be made after the rope was in place.
Meets the requirements of US Federal Specification
Wire Rope Thimbles are high-strength protective fittings used in the eye terminations of wire ropes. These thimbles are manufactured from hot-dip galvanized or stainless steel and are classified under Type I (Standard Duty) and Type II (Heavy Duty) designs, suitable for both commercial and industrial applications
Meets the requirements of IS 2315
IS 2315 thimbles are precision-engineered metal inserts designed to protect the eye or loop of a wire rope from abrasion, deformation, and wear at the termination point. Manufactured in accordance with IS 2315:1972, these thimbles are typically made from mild or forged steel and are available in both light and heavy-duty patterns, depending on the application.